Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Vertical Laminar Flow Benches

Vertical Laminar Flow Benches deliver an ultra clean laminar airflow over a working bench to protect manipulated products from dust, from environment contamination and from cross contamination in the working area.

They are an ideal solution for the handling of harmless substances and non hazardous biological samples where product sterility is required.

Appropriate applications for Vertical Clean Benches include cell & tissue culture, media preparation, hematology, immunology or R&D practices working with no toxic or pathogenic samples.

Vertical Laminar Flow Benches: V-100 series

V-100 Series are recommended for the handling of non hazardous biological samples (cell and tissue culture) as well as for optics and electronics.

Main features: The unit is provided with one HEPA-14 filter for the downflow, allowing operation in sterile and particle free conditions due to the continuous flushing of the working area by a unidirectional vertical and ultra filtered air flow, thus assuring full product protection. The flow is partially recirculated to keep the working chamber under negative pressure. Inflow at the front access of the cabinet is providing basic user protection against splashes and odours.

Vertical Laminar Flow Benches with Containment: V-30/70 series
Vertical Laminar Flow Benches with containment deliver an ultra clean laminar airflow over a working bench to protect manipulated products from dust, from environment contamination and from cross contamination in the working area. The product and user protection is increased applying identical principle used for Telstar Class II BioSafety Cabinets, and having the same number and quality HEPA-14 filters. All over pressure zones are surrounded by under negative pressure to prevent any leak back into the room or the clean zones of the cabinet. An additional air flow enters from the front to create an air barrier which brings protection to operator and to lab environment.
Main features: The unit is provided with two HEPA-14 filters, one for the downflow and another for the exhaust. 70% of the air is recirculated thus minimizing filter clogging and the other 30% is expelled through HEPA-14 filter at top of the unit.

All models are supplied with a working area ISO 4 air quality (Class 10, F.S 209B).